Blog/Railcars & Equipment

Empty Railcar Return: Routing, Storage and Cycle Time for Private Cars

November 17, 2026 · 13 min read · Railcars & Equipment
Every empty mile is paid for by the loaded move. Know what the loaded move costs. Get an indicative rail freight quote for your lane in seconds — free with your email.
Key fact: If you release a private car without empty instructions, the industry tariff lets the railroad send it back to the origin of its last load by the reverse of the loaded route (RIC 6007-O, Items 190 and 615). That default is free on most lanes. Changing it after release, or letting the empty sit on railroad track, is where the charges start.

An empty railcar earns nothing. It does not carry freight, it does not earn mileage allowance, and the lease payment keeps running whether it is moving or parked. Yet the empty half of the trip is where most private fleets lose the most days. A car is released without instructions, waits for a pull, sits on a storage track behind a full plant, or comes home by a route nobody asked for. This guide covers how empty railcar return works under the industry and railroad tariffs, what it costs when empties sit, and how to measure and cut cycle time so you run fewer cars for the same freight.

The Default Rule: Reverse Route to Origin

When a private car is released empty, the owner or lessee is supposed to tell the railroad where it goes next. If no instructions are in the railroad's hands by the time the car is released, the agent at the unloading point is authorized to forward the empty to the origin point of its last load, via the reverse of the loaded route. That rule is written into RIC 6007-O, the industry tariff for cars of private ownership, in Item 190 for tank cars and Item 615 for other car types.

Three details in that rule matter more than they look:

The industry rule is the floor. Each Class I railroad also publishes its own empty-car rules, and on non-tank cars some of them take Item 615 out of play entirely. Its exceptions list says the item does not apply for the account of BNSF, CSX, NS or UP, which publish their own provisions instead.

How Each Class I Handles Private Empties

Each of the four large U.S. railroads has a default that sends a private empty back to where it was loaded, usually without a freight charge when it goes back promptly by the reverse route. What changes is the time limit, how you send a different instruction, and what you pay when you do.

RailroadDefault for a private emptyLimits and chargesSource
Norfolk SouthernTank cars: returned by reverse of the loaded route to the origin of the last loaded moveA different route or destination needs empty billing sent through NS's internet application before release. Changes after release fall under NS diversion charges. NS accepts diversion orders on private empties only from the owner or lessee shown in Umler.RIC 6007-O, Item 135; NS 8002-A, Item 2010
CSXAutomatically reverse routed to the last point of origin or interchangeAuto reverse routing is not available if the inbound load's billing date is more than 120 days old for private equipment, if the load was rejected, or across the U.S.-Canada border. A car with more than 1,000 pounds of lading is not considered empty. Diversions cost $275 per car, or $2,750 for a block of 10 or more.CSXT 8100, sections 1.2.2 and 1.2.4
Union PacificNon-tank empties move free one timeFree only if released within 225 days of the prior loaded waybill date and UP earned line-haul revenue on that load. Otherwise line-haul charges under UP 4703 apply.UP 6004, Item 50-G
BNSFOn private-car rates that do not pay mileage, the rate includes the empty return to the point of prior loading via reverse of the loaded routeAny other empty movement is charged under the applicable BNSF tariff.BNSF 6100-C, Item 6080

Two practical takeaways. First, a car that sits a long time between its last load and its release can lose its free return. Union Pacific's limit is 225 days, and CSX's auto reverse routing stops at 120 days for private equipment. Second, the cheapest instruction is the one sent with the loaded bill. Every railroad handles a planned empty move better than a changed one.

Most contracts and private price documents add their own empty-return terms on top of these. If your rate came from a contract, read its equipment section before you assume the tariff default applies.

Changing the Route: Diversions and Excess Empty Miles

Sending an empty somewhere other than home is normal. You may want it at a second plant, a cleaning or repair shop, a storage yard, or a new loading point for a different customer. The question is when you send that instruction and what kind of car it is.

Diversion charges after release

Once a car is released and on its way, a change is a diversion. NS applies its diversion charges (NS 8002 series) to empty tank car instructions changed after release. CSX charges $275 per car diverted or per change to a shipping instruction, or $2,750 for blocks of 10 or more cars on one instruction (CSXT 8100, section 1.2.4, effective December 1, 2026). On a 30-car release, sending a correction after the fact costs real money before the car has moved a mile.

Tank cars: empty-mileage equalization

Tank car owners carry an extra rule. Under RIC 6007-O Item 187, if the empty miles of all tank cars under one owner's reporting marks exceed their loaded miles by more than 6 percent in a calendar year, the owner pays for the excess at $1.17 per mile, with no minimum. That rate is from the September 2026 issue of the tariff.

Item 190 adds a sharper edge. If the owner asks for an empty tank car to go back to the origin of its last load by a route different from the reverse of the loaded route, the total miles of that return are billed at the excess empty mileage rate and charged to whoever asked for the change. A tank fleet that repositions cars cross-country to chase a new lane can turn its mileage allowance into a bill.

Empties going to a shop

Empties headed to a cleaning, lining or repair facility have their own rules. Under RIC 6007-O Item 192, an empty private tank car held on railroad track for a non-railroad repair facility gets 48 hours of free time, not counting weekends and holidays. After that it pays a supplementary handling charge of $130 per car plus a holding charge of $1 per car per day. Union Pacific opts out of the free shop moves in Item 190 and charges its own tariff for tank car moves to and from repair facilities (UP 6004, Item 55-C). BNSF charges $160 per car to switch an empty between interchange and a shop facility (BNSF 6100-C, Item 8250).

What Empties Cost While They Wait

An empty that has nowhere to go ends up on railroad track, and the railroad bills private car storage for it. These are per-car, per-day charges with few or no free days, and they are billed monthly.

RailroadCharge on a private empty held on railroad trackSource
Norfolk Southern$115 per car per day, zero credit daysNS 6004-D, Item 1010 (July 1, 2026)
CSX$120 per car per day, 1 credit day for empty cars; plus $50 per car per day when a specific private car sits static awaiting customer instructions for more than 10 daysCSXT 8100, sections 2.5 and 2.2.2 (December 1, 2026)
Union PacificPrivate Empty Car Storage (PECS), $195 per net chargeable storage day after creditsUP 6004, Item 9890

The CSX $50 charge is new in the December 2026 publication, and it targets exactly the empty that nobody has given instructions for. Union Pacific has a different lever. Under UP 6004 Item 9895, if empties accruing PECS charges are congesting a serving area, UP can ask for empty disposition and, if none arrives within 24 hours of its final notice, move the cars to the storage location on file with Railinc. Non-tank cars moved that way pay line-haul charges, and PECS keeps running once they land.

That is why an up-to-date storage location matters. If you know a block of cars will be surplus for a season, park them on purpose at a short-line or contract yard instead of letting a Class I park them for you. Our guide to railcar storage rates covers what yards charge, and the storage locator lists yards by railroad. For how the railroad builds the storage invoice and how to dispute it, see private car storage charges.

Cycle Time: The Number That Sizes Your Fleet

Railcar cycle time is the number of days from one loading of a car to its next loading. It is the single number that decides how many cars you need. A shorter cycle means fewer cars for the same freight, and every car you do not need is a lease payment you do not make.

A full cycle has six parts:

  1. Loading dwell: placement at origin to release loaded.
  2. Loaded transit: pull at origin to constructive or actual placement at destination.
  3. Unloading dwell: placement at destination to release empty.
  4. Empty pull: release empty to the railroad pulling the car.
  5. Empty transit: pull at destination to arrival back at origin.
  6. Origin wait: arrival at origin to placement for the next load.

The shipper controls parts 1, 3 and 6 outright and influences 4 by releasing cars promptly. The railroad controls the transit legs. In practice the empty half of the cycle, parts 3 through 6, is where a fleet manager has the most room to move.

The fleet-sizing formula

For steady loading through the year, cars needed is roughly:

Cars needed = annual carloads × average cycle days ÷ 365, then add a spare margin for bad orders and surges.

Here is an illustrative example. A shipper loads 600 carloads a year in leased covered hoppers, and its cars average a 30-day cycle. That works out to 600 × 30 ÷ 365 = 49.3, so about 50 cars. If better release discipline and fewer days on storage tracks cut the average to 26 days, the same 600 loads need 600 × 26 ÷ 365 = 42.7, or about 43 cars. At an illustrative lease rate of $900 per car per month, the 7 cars you no longer need are worth $75,600 a year. That figure doesn't count the storage charges those extra cars would have run up while they waited.

The rail fleet calculator runs the same math for your car counts. If the numbers show cars you no longer need, list them on the railcar sublease board instead of paying to store them.

Where the Empty Days Go

When a fleet's cycle time creeps up, the cause is usually one of a handful of things on the empty side:

The fix for most of these is visibility. Tracking where a car is helps, but it is not enough. Someone has to notice that a car has been at the same location for six days and do something about it. That is the gap between tracking and actually managing a fleet.

An Empty Car Management Checklist

  1. Put empty instructions on the loaded bill. RIC 6007-O allows it by EDI. A planned empty move avoids defaults and diversion fees.
  2. Keep Umler and your storage location current. CSX requires you to update Umler (or give CSX real-time access to your car list) for cars you tender, NS takes empty diversion orders only from the owner or lessee shown in Umler, and UP repositions surplus empties to the storage location on file with Railinc.
  3. Release empties the day they are empty. Close every door and hatch first. CSX holds customers liable for damage caused by an empty released without doors and hatches closed and loose cables and dunnage secured (CSXT 8100, section 1.3.8).
  4. Watch for empties standing still. Flag any car that has not moved in 3 to 5 days. On CSX, waiting past 10 days for instructions now adds $50 a day.
  5. Track tank car empty miles against loaded miles. Stay inside the 6 percent band before the year ends, not after the equalization bill arrives.
  6. Measure cycle time every month. Split it into the six parts above so you know which leg grew.
  7. Audit the storage bill. Check release times, bad-order days and railroad-caused delays against the railroad's event data.
  8. Right-size the fleet. If the formula says you have surplus cars, store them on purpose, sublease them, or return them at lease end.

If that list is more than your team has time for, empty car management is part of Steel Wheel's managed rail service, along with tracking, exception handling and storage-bill audits. See our outsourced rail department page or our full rail logistics services. If you are still learning how car supply and railroad service work, Module 2 of our free course, Working with Railroads, covers the basics.

Frequently Asked Questions

What happens to an empty railcar if I don't send instructions?

Under RIC 6007-O (Item 190 for tank cars, Item 615 for other private cars), the railroad agent at the unloading point is authorized to forward the empty to the origin of its last load via the reverse of the loaded route. NS and CSX publish the same default, and CSX calls it auto reverse routing. Tank cars that last held hazardous material still need shipping papers before they move.

Do I pay freight to return an empty private railcar?

Usually not, if it goes back the way it came soon after the load. Union Pacific moves a non-tank private empty free one time if it is released within 225 days of the prior loaded waybill and UP earned the line-haul revenue (UP 6004, Item 50-G). Repositioning moves, moves for sale or scrap, and new cars moving before their first load are charged.

Can I send an empty railcar somewhere other than where it was loaded?

Yes, but send the instructions before you release the car. Norfolk Southern requires different-route or different-destination empty billing before release, and a change after release falls under its diversion charges. CSX charges $275 per car, or $2,750 for a block of 10 or more, for diversions and changes to shipping instructions (CSXT 8100, section 1.2.4).

What is railcar cycle time?

Cycle time is the number of days from one loading of a car to its next loading: loading dwell, loaded transit, unloading dwell, the empty trip home, and any wait before the car is loaded again. It sets the size of fleet you need. Cars needed is roughly annual carloads times cycle days divided by 365.

Why do tank car owners care about empty miles?

Tank car owners pay for excess empty miles. If the empty miles under one set of reporting marks exceed loaded miles by more than 6 percent in a calendar year, the owner pays $1.17 for each excess mile (RIC 6007-O, Item 187, September 2026 issue). Routing empties back a different way than they came is billed at the same rate to whoever asked for it.

Sources: Railinc, Freight Tariff RIC 6007-O, issued September 22, 2026, effective September 1, 2026 (Items 135, 187, 190, 192 and 615); Union Pacific Tariff UP 6004-C, Items 50-G, 55-C, 9890 and 9895-C; BNSF Rules Book 6100-C, Item 6080; CSXT Publication 8100, effective December 1, 2026, sections 1.2.2, 1.2.4, 1.3.8, 2.2.2 and 2.5; Norfolk Southern Tariff NS 6004-D, effective July 1, 2026, Item 1010, and NS 8002-A, effective August 1, 2026, Item 2010. Fleet and lease figures in the cycle-time example are illustrative.

Steel Wheel Logistics
Steel Wheel Logistics
We coordinate bulk rail freight across North America — from rate negotiation and car sourcing to transload coordination and tracking. Serving shippers nationwide.

Empties Sitting Too Long?

Send us your car list and a month of storage bills. We'll show you where the empty days are going, what they cost, and whether your fleet is bigger than your freight needs.

Get a Fleet Review
← Back to All Posts