A car shortage rarely shows up as a phone call from the railroad. Usually you just get fewer cars than you ordered. You order 15 covered hoppers for the week, eight show up, the order closes, and your customer asks why the product isn't moving. The railroad hasn't refused you service. It has handed its pool of system cars to other customers first. This guide covers how car orders work when cars are short, what you can control, and what to do when the railroad can't supply the cars you need.
Why Railroads Run Short of Cars
Railroads run short of cars when demand for one car type outruns the empties sitting where shippers need them. The railroad may own plenty of that car type in total. The shortage comes from cars that are loaded, stuck in yards, waiting at customers or sitting out of position. For shippers on system cars, the result looks the same either way: orders go partly filled.
A few things drive most shortages:
- Seasonal peaks. Grain harvest pulls covered hoppers into ag service. Construction season tightens gondolas and aggregate cars. Every shipper of that car type is ordering in the same weeks.
- Slow car cycles. A car that takes longer to make its round trip does fewer loads a month. When the network slows, the same fleet carries less freight, and orders that filled easily last quarter start falling short.
- Cars held at customers. Empties waiting at a plant that is behind on loading, and loads waiting at a receiver that is behind on unloading, are out of the pool. Demurrage exists largely to push those cars back into circulation.
- Fleet decisions. Railroads own a minority of the freight car fleet. In Umler data cited by GATX (January 2016), lessors owned 51% of roughly 1.6 million North American railcars, railroads 21%, shippers 19% and TTX 9%. When a railroad retires old cars and doesn't replace them all, its system pool shrinks, and the missing capacity is supposed to come from leased and private cars.
The last point matters most for planning. A railroad's system pool is designed to be tight. If your business depends on it in peak season, you're betting on the cars that are left after the railroad's committed programs are covered.
What Happens to an Unfilled Car Order
On most railroads, an unfilled car order is reduced or expires. It doesn't carry forward. You don't build up a backlog of cars the railroad owes you. Each railroad publishes its own rules, so read your serving carrier's ordering rules and accessorial tariff. Union Pacific's published policy shows how this works on one large system.
Union Pacific's car order rules
- Lead time. Weekly car orders go in 10 to 60 days ahead of the want date. Increases inside the 10-day window are approved only if equipment is available.
- Weekly order windows. The order week runs Sunday 12:01 a.m. to Saturday 11:59 p.m. Only one order can exist for the same equipment type in the same week.
- Unfilled orders expire. Every Saturday at 11:59 p.m., orders for the week just ending that have no cars applied expire. If cars can't be supplied within the week, the order is reduced to the number of cars applied. UP's own example: an order for five cars with three applied becomes an order for three.
- Unused cars cost money. Clean empty equipment returned to the railroad unused is subject to an "order not used" charge under tariff UP 6004-C, Item 9015-D, if it was placed or delivered within plus or minus two days of the want date. Cancelling cars already applied to an order also draws charges under UP 6004.
The charges don't run both ways. Over-order and you can pay for cars you don't use. Get shorted and there's no penalty on the railroad. The tariff just reduces your order. So padding orders to "make sure you get enough" can backfire. Cancellation and order-not-used charges exist to discourage exactly that.
Grain is different
Grain shippers mostly don't rely on open weekly orders. Grain cars are largely committed in advance through shuttle and dedicated-train programs, reservation systems and secondary-market trading of car rights. On September 23, 2026, BNSF sold 13 year-long shuttle train contracts beginning January 2027 for $17.2 million. Winning bids averaged about $1.3 million per contract, more than double the roughly $595,000 average for comparable January 2026 contracts, according to USDA's Grain Transportation Report (September 24, 2026). In the same report, secondary-market bids for September shuttle cars averaged $525 per car over tariff.
When car capacity is sold at auction and resold above tariff, a shipper who only places open orders gets whatever cars are left. That doesn't make the system unfair. It means the system rewards commitment.
What to Do the Week Cars Don't Show
When a car order comes up short, do three things the same week: document the shortfall, open a case with the railroad, and protect your outbound commitments. The goal is to get cars moving and to build the record you'll need if the problem keeps happening.
- Pull the order history. Order number, car type, want date, cars ordered and cars applied. Screenshot or export it from the railroad's portal before the order closes or expires.
- Open a case, in writing. Use the railroad's case or service-issue system rather than a phone call alone. On UP, an order with no cars applied goes to Case Management, or 800-272-8777 if you can't submit a service issue. Ask for an expected supply date and whether a substitute car type is available.
- Re-order for next week. Because unfilled orders expire, the shortfall doesn't automatically carry forward. Place the next week's order inside the normal lead time.
- Call your account manager. Customer service tracks the order. Your account manager can sometimes find cars from another pool, approve a different car type, or tell you honestly how long the tight supply will last.
- Tell your customer early. A short week you announce on Tuesday is a delay. A short week they discover on Friday is a broken promise.
- Check whether it's really a car shortage. Sometimes the cars exist and the problem is local service: the empties are sitting in the serving yard and the local didn't switch you. That's a different fix. See why rail shipments get delayed.
Your Options When System Cars Are Short
When the railroad can't supply enough cars, you have five practical options: substitute a different car type, lease or sublease your own cars, shift loading to a transload on another railroad, move part of the volume by truck, or commit to a car program for next season. Most shippers use two or three at once.
| Option | How fast | What it costs | Best when |
|---|---|---|---|
| Substitute car type | Days, if approved | Possibly a different rate or load per car | Your product can load in more than one car type |
| Sublease cars | Weeks | Monthly rent per car plus moving the empties to you | The shortage is seasonal or you're testing volume |
| Lease cars | Weeks to months | Multi-year rent per car; rent runs even when cars sit | Volume is steady and the shortage keeps coming back |
| Transload on another railroad | Days to weeks | Truck dray plus transload handling | A nearby facility has better car supply |
| Truck the overflow | Immediate | Usually more per ton, especially long distance | Short-term gap, high-value or urgent loads |
1. Substitute a different car type
Ask whether a similar car type is available. A product that normally loads in one covered hopper size may load in another. Some steel products can go in a gondola or on a flatcar. Substitution has to be approved, usually through your marketing and sales contact, and it can change the rate, the load per car and your unloading method. Check that your receiver can unload the substitute car before you accept it. Our guide to rail car types covers which cars can stand in for which.
2. Get your own cars: sublease or lease
Private cars take you out of the system car pool. You load them when you're ready, and nobody reassigns them to another shipper. A railcar sublease is the fastest way in: another shipper with idle leased cars rents them to you for part of the remaining term. A full lease from one of the railcar leasing companies makes sense once the shortage is clearly a pattern, not a one-off.
Two cautions. First, check your rate. Many railroads quote a different rate for private equipment than for railroad-supplied cars, so ask for the private-car rate before you sign a lease. Second, private cars bring storage risk. If volume drops after the peak, you pay rent on cars that sit, plus any storage charges. Size the fleet for your base volume, not your best month.
Steel Wheel sources leased and subleased cars for shippers who don't have a lessor relationship yet. See railcar sourcing and leasing.
3. Load at a transload on a different railroad
If your plant is served by one railroad and cars are short there, a transload facility on a connecting or competing railroad may have better supply for your car type. You truck the product a short distance and load it there. That adds a dray and handling charges, so run the numbers against waiting. Our transloading guide explains how this works and what it costs. If you're served by one carrier and want access to another without moving the freight, read about reciprocal switching.
4. Truck the overflow
Moving part of the volume by truck keeps customers supplied while you sort out car supply. On long hauls it usually costs more per ton, so treat it as a bridge, not a plan. Truck the most urgent or highest-value loads, and keep the rest on rail.
5. Commit to a program next season
If shortages hit every peak, the fix is usually a commitment made before the peak starts. That can mean a car supply program, a contract with volume commitments, or a lease that covers your base fleet. Railroads plan car supply around customers who commit. Talk to your account manager about what programs exist for your car type well ahead of the season, not during it.
When a Shortage Becomes a Service Failure
A railroad has a legal duty to provide car service, but that duty doesn't guarantee you a car every time you order one. Under 49 U.S.C. 11121(a)(1), a rail carrier must "furnish safe and adequate car service" and enforce reasonable car service rules. The Surface Transportation Board judges "adequate" in context. A short week during harvest usually isn't a violation. Months of orders filled at a fraction while similar shippers get cars may be.
Federal law has tools for severe cases:
- Emergency service orders. Under 49 U.S.C. 11123, when the STB finds a "shortage of equipment," congestion or other failure of traffic movement creating an emergency with substantial adverse effects on shippers, it can direct how traffic and cars are handled, routed and distributed for up to 30 days, with extensions. Total extensions can't run more than 240 days beyond the first 30.
- Public car supply data. Under 49 CFR 1250.2(a)(8), Class I railroads report weekly, by state, grain car orders placed, orders filled, and unfilled orders 1-10 and 11+ days past due for cars moving in manifest service. If you ship grain, that data tells you whether your shortage is local or system-wide.
- Informal help first. The STB's Rail Customer and Public Assistance program can work an issue with the railroad before anyone files anything formal.
Your order records are what make any of this work. Order dates, cars ordered, cars applied and case numbers turn "we never get cars" into a pattern the railroad and the Board can't wave off. For the full escalation path, read how to escalate a rail service complaint.
Building a Car Plan That Survives the Next Shortage
The shippers who come through shortages in good shape usually don't rely on system cars alone. They keep a base fleet of private cars, use system cars for the variable part of their volume, and know their backup before they need it. A simple plan looks like this:
- Know your cycle time. Track how many days a car takes from placement to its return. Fleet size follows from it: cars needed = (loads per month ÷ 30) × cycle days, plus spares.
- Cover your base volume with private cars. Illustrative example: a shipper loading 30 cars a month with a 30-day cycle needs about 30 cars to cover that volume. Leasing 20 covers the steady two-thirds. System cars or a seasonal sublease cover the rest.
- Turn cars fast. Every day a car sits at your plant is a day it isn't in the pool, and on railroad cars it may be running demurrage. Shippers who release cars promptly tend to be the shippers railroads want to keep supplied.
- Line up a backup loading point. Know which transload facility can load your product on another railroad, and what it charges, before you need it.
- Read the embargo and service notices. A tight car type often comes with service advisories and sometimes embargoes. Watch your railroad's customer notices so the shortage doesn't surprise you.
If you're new to rail and still deciding between system cars and leasing, start with how to get railcars as a new shipper. The free rail logistics courses cover working with your serving railroad in more depth, and our rail logistics services cover car sourcing, lease placement and day-to-day car management when you'd rather not run it in-house.
Frequently Asked Questions
What happens if the railroad doesn't fill my car order?
On most railroads the unfilled part of the order is reduced or expires. It doesn't carry forward. On Union Pacific, weekly orders with no cars applied expire Saturday at 11:59 p.m., and partly filled orders are cut to the cars applied. Re-order for the next week and open a written case.
How far in advance should I order railcars?
Follow your railroad's published lead time and order as early as it allows in peak season. Union Pacific takes weekly car orders 10 to 60 days ahead of the want date, and increases inside the 10-day window depend on equipment availability.
Is a railroad required to supply railcars?
A railroad must furnish safe and adequate car service under 49 U.S.C. 11121, but that is judged in context and doesn't guarantee every order is filled. Ongoing, documented shortfalls can be raised with the railroad and then the STB, which can issue emergency service orders under 49 U.S.C. 11123.
Should I order extra cars to make up for a shortage?
Usually no. Railroads charge for cars that are ordered and not used. Union Pacific applies an "order not used" charge under UP 6004-C, Item 9015-D, to clean empties returned unused within two days of the want date. Order what you can load, and fill the gap with leased or subleased cars.
What is the fastest way to get railcars during a shortage?
A car type substitution, if your railroad approves it and your receiver can unload it, is often fastest. A sublease of idle cars from another shipper usually takes weeks. A full lease takes longer but takes you out of the system car pool for good.
Sources: Union Pacific, "General Policy" and "Order FAQ" car ordering pages (up.com, accessed November 14, 2026), and Accessorial Tariff UP 6004-C, Item 9015-D; 49 U.S.C. §§ 11121(a)(1), 11123; 49 CFR 1250.2(a)(8); USDA AMS Grain Transportation Report, September 24, 2026; GATX citing Umler fleet ownership data, January 2016. Fleet-size figures are illustrative.