FSC factors as of September 2026 · URCS Phase III + carrier-published mileage FSC
Rail route · 1,920 mi · BNSF → CSAO → CSXT → EACH → LI → NJT → NS → NYNJ → UP
The Brooklyn, NY-San Antonio, TX rail corridor primarily serves Amtrak (AMTK) as its main carrier, facilitating intercity passenger transport across a significant portion of the Eastern and Southern United States. This corridor connects major urban centers and supports regional economies by enhancing accessibility and mobility. Notably, it includes key interchange points with freight lines, allowing for efficient transfer of goods and services along the route.
| Segment | Carrier | Miles | Line-Haul | Fuel Surcharge | Total |
|---|---|---|---|---|---|
| Starting segment | NS | 1,204 | $5,682 | $891 | $6,573 |
| Ending segment | UP | 716 | $3,381 | $480 | $3,861 |
| Interchange fee (1 interchange) | — | — | — | $250 | |
| Estimated Tariff Total | 1,920 | $9,063 | $1,370 | $10,684 | |
Tweak weight, car type, or year and see how the rate moves. Or talk to us about your real shipment — we coordinate carload and unit-train moves for grain and other bulk commodities.
Other grain corridors near this route.
Steel Wheel Logistics does not publish transit times for this corridor. Actual transit depends on car supply, interchange dwell, switching at origin and destination, and any required transload. When we set up a lane we obtain the serving railroad's current service plan and share it with you before the first load.
Each Class I publishes a mileage-based fuel surcharge (FSC) tied to the EIA highway-diesel fuel index. BNSF and any participating carriers each apply their own published cents-per-mile factor to the miles they handle. FSC totals on this lane re-derive monthly as fuel prices move; the figure shown is current as of the date stamped in the hero card above.
Yes. We coordinate grain rail freight on single-line and interline routings across the U.S. Class I network, working directly with the carriers and any required short-line or transload partners. Contact us for a discussion of your specific shipment. The figures on this page are indicative estimates; every move is priced after lane and equipment review.
Grain typically moves in covered hopper equipment. Actual car selection depends on the specific product spec, packaging, loading and unloading conditions at origin and destination, and current car-supply on the chosen carrier. We help shippers source the right equipment as part of the lane setup.
At 1,920 rail miles, rail typically wins on bulk moves at this distance — rail's per-ton-mile cost compresses sharply above ~500 miles and even more sharply at unit-train volumes. Use our rail-vs-truck comparison tool to model specific volumes side-by-side, and remember to account for transload, the truck leg at each end, and demurrage on the rail side.
